Support - Usage Instructions

ADHESIVES - STUCCO - MORTAR

VERKON V-51 - Extra

Acrylic adhesive powder for gluing together ceramic tiles on walls and floors
- Before use, clean the surface well from dust, oil, fat, grease etc.
- Prepare the adhesive, mixing the powder with water until it reaches the desired consistency, stirring continually until it is fully absorbed.
- Formula : 2 - 2.5 parts of powder to 1 part water approx.
- The mixture should be used within 8-9 hours depending on the room temperature. When spread on the surface it dries within 15-25 minutes approx. depending on the room temperature.
- Applied with a serrated spreader
    Consumption:
    1.1 - 1.3 Kg per m2 according to the surface.

    Packaging:
    Bag 5Kg - 10Kg - 20Kg - 25Kg.





VERKON V-52 - Super

Adhesive in powder form for gluing together ceramic tiles on walls and floors.
- Before use , clean the surface well from dust, oil, fat, grease etc.
- The adhesive is prepared by mixing the powder with water, stirring continuously, until it reaches the desired consistency.
- Formula: 2 - 2.5 part powder - 1 part water approximately.
- The mixture should be used within 3-4 hours, depending on the room temperature. When applied on the surface it dries within 15-25 minutes approximately,.
- Applied with a serrated spreader.
    Consumption:
    1.1 - 1.3 Kg per m2 according to the surface.

    Packaging:
    Bag 5Kg - 10Kg - 20Kg - 25Kg.





VERKON V-58

Adhesive in powder form - grey.
- Before use, clean the surface thorouhly from dust, oil, fat, grease etc.
- Prepare the adhesive by mixing the powder with water until it reaches the desired consistency, stirring continuously until completely absorbed.
- Formula: 2 - 2.5 part powder - 1 part water approximately.
- The mixture should be used within 3-4 hours, depending on the room temperature. When applied on the surface it dries within 15-25 minutes approximately, depending on the room temperature.
- Applied with a serrated spreader.
    Consumption:
    1.5 - 2.5 Kg per m2.

    Packaging:
    Bag 5Kg - 10Kg - 20Kg - 25Kg.





VERKON V-53

Special elastic dry stucco for ceramic tile grout on walls and floors. In special cases matched without adhesive resin VERKON V-2001 (Outside areas- swimming pools etc.)
Colours: White, Grey, Light Grey, Brown, Light Brown, Beige, Ochre, Black and a further 30 colours when ordered.
1. Before use thoroughly clean the joins and tiles from dust, grease, oil, fat, etc.
2. Preparation: mixing the powder with water until the desired consistency, stirring continuously until completely absorbed.
3. Application: On vertical surfaces with a spreader and on horizontal surfaces with a float or rubber trowel.
4. Formula powder - water: 2.5 - 3 part powder to 1 part water depending on where the mixture will be applied.
    Consumption:
    Depends on the width of the grouting.

    Packaging:
    Bag 5Kg (colours).





VERKON V-54

Ready-to-use stucco in powder form. Mixed powder, ready for use, cement like basis -inactive minerals and synthetic rubber resins Known for its sure adhesion, great resistance to cracks and least hazard of drying out. Reliable constancy and permeability to vapour, high resistance to weather conditions. Quick and easy to work with just by adding water to the powder.

Before use thoroughly clean all surfaces from dust, oil, fat, grease and any other kind of dirt. Prepare a paste adding an amount of water to the powder until the desired consistency is reached then spread it.

    Consumption:
    1 - 1.5 Kg per m2 according to the surface.

    Packaging:
    Bag 5Kg, 15Kg.





VERKON V-57 - Vertina

Acrylic stucco in powder form. Ready-for-use stucco for spreading on walls - repairs - stucco-work. Mix only with water. Not affected by damp.
    Consumption:
    1 - 1.5 Kg per m2 depending on the surface.

    Packaging:
    Bag 5Kg, 15Kg.





VERKON V-55

Quick Setting Cement .
- Used for making quick setting concrete, cement mortar etc.
- Setting time depends on the room temperature, water added and the amount of inactivity.
    Consumption:
    ---

    Packaging:
    Bag 5Kg, 20Kg.





VERKON V-56

Instant Cement. Sets in 30min - 60min according to the water in the mixture and the temperature of the environment. Used for covering cracks, cavities with water leakage, in mortaring 25-35%, adding to cement to make it set more quickly and elsewhere. It is free of chlorine and other corrosive and acidic substances.
    Consumption:
    ---

    Packaging:
    Container 5Kg,15Kg.





VERKON V-71 - Verpaco

Non-shrinking Mortar. Mixed only with water (4-4.5 Kg water per 1 sack of VERPACO according to the desired consistency and the temperature of the environment). Used for undersetting, caulking, fixing cavities, cracks and for various repairs on vertical and horizontal surfaces. Because of its high automatic resistance it is suitable for producing special bases and levelling floors of whatever traffic Type V.S. is also produced with setting time 12-13 min.
    Consumption:
    ---

    Packaging:
    Bag 5Kg, 25Kg.





VERKON V-72 - Verpaco v.s.

Non-Shrinking Mortar Quick Setting for cavities, cracks, for caulking, undersetting and for various repairs on horizontal and vertical surfaces. It is also suitable for producing special bases and levelled floors. Setting time 12 min.
    Consumption:
    ---

    Packaging:
    Bag 5Kg, 25Kg.





 FINISHERS ADDED TO CONCRETE - AND MORTAR

VERKON V-2001

Adhesive rubber resin. Strengthening tile adhesive - grout - mortar for walls - bridging new-old concrete and many other applications.
) For the strengthening of tile adhesive- grout - mortar for walls: Prepare a mixture made up of 2-4 parts water - 1 part adhesive resin and is added to the mortar increasing its adhesive capabilities.
) Bridging old-new concrete - floors - cement mortaring etc. Clean the surface well and undercoated with a solution in the formula 1 part adhesive resin - 2-4 parts water. On the already undercoated fresh surface lay mixture made up of:
1 part cement mass
1 part fine grain sand
1 part adhesive resin and corresponding amount of water.
Laid with a trowel or spreader.
    Consumption:
    2 - 4% of the cement weight.

    Packaging:
    Container 1Kg, 2Kg, 4Kg, 20Kg, 150Kg.





VERKON V-2002

Emulsifier - Plasticizer . Liquid solution brown colour, synthetic resin base. Free of chlorine and other corrosive and acidic substances. Improves the workability by simultaneously reducing and the division of the concrete. After the concrete has set it occasions an even structure with even constancy. Reduces the water added with an increase in the concrete's resistance at the same time. Used in all concrete work where a small values water cement factors. Easy workability and drying. Especially used in transported concrete. Open concrete and road building concrete. Is added to the necessary amount of water. It is also possible to add it to the ready mix.
    Consumption:
    1 - 3% the weight of the cement corresponding to the contents of the cement.

    Packaging:
    Container 4Kg, 20Kg, 150Kg.





VERKON V-2003

Drying resin for concrete and mortar. Drying resin, additive improves the impermeability of a mass of concrete or mortar. It tightens the mass of mortar, increases the resistance an protects the concrete and the mortar from frost and adverse weather conditions. Used for drying: Prefabs- housing - basements - flat roofs - external wall constructions and coating. Thin in the necessary amount of water that will be used to prepare concrete or the mortar in the formula: 1-3% of cement weight.
    Consumption:
    1 - 3% of cement weight.

    Packaging:
    Container 1Kg, 2Kg, 4Kg, 20Kg, 150Kg.





VERKON V-2004

Cast Adhesive Remover. Clear liquid, ready-for-use, base non-synthetic anti-adhesive substance, free of chlorine and other corrosive or acidic substances. Used for coating casts in the building and preparation field. Coat the surface of the casts with a brush spray them with a gun.
    Consumption:
    50 - 100 gr per m2 according to the surface of the mortar.

    Packaging:
    Container 17Kg, 150Kg.





VERKON V-2005

Liquid that replaces lime. Liquid solution, brown colour, sulphurized resin base free of chlorine - corrosive and acidic substances Used with building mortar and internal plastering. Dissolved in the necessary amount of water water.
a) For 70-80 gr/25Kg cement.
b) For internal plastering 90-100 gr/25Kg cement.
    Consumption:
    80 - 100 gr per bag of cement.

    Packaging:
    Container 1Kg, 2Kg, 4Kg, 20Kg, 150Kg.





PAINTS - RELIEF

VERKON V-2051

Plastic paint white super, General use. Plastic paint paste, for internal and external surfaces. Characterised by great coverage and resistance. Before use mix with water in the formula 30-35% for the first coat and 10% for the second coat after the first one has dried. Applied with a brush or roll.
    Consumption:
    200 - 300 gr. per m2 per coat according to the surface.

    Packaging:
    Container 1Kg, 5Kg, 15Kg.





VERKON V-2052

Plastic paint white extra, general use. Plastic paint extra paste, for internal and external surfaces. Characterised by great coverage and resistance. Before use mix with water in formula 30-35% for the first coat and 10% for the second coat after the first has dried. Applied with a brush or roll.
    Consumption:
    200 - 300 gr. per m2 per coat according to the surface.

    Packaging:
    Container 1Kg, 5Kg, 15Kg.





VERKON V-2053

Acrylic Concrete Paint . Acrylic paint with great resistance to adverse weather conditions Suitable for painting external surfaces. (Concrete, plaster, asbestos tiles, cement mortar, column structures etc.) Before use mixed with water according to the formula 30-40% for the first coat and 10% for the second coat.
    Consumption:
    200 - 250 gr. per m2 per coat according to the surface.

    Packaging:
    Container 5Kg, 15Kg.





VERKON V-2054

Acrylic Relief. Raised decorative coating, acrylic base, for internal and external surfaces. Breathes, Ecological. Resistant to weather conditions, unaffected by damp.
Applied with a roll directly on the fine plaster, in two coats. 1st coat: (Undercoat, thinned with water 15-20%)
2nd coat: (Just the material). Also produced in various colours - to order.
    Consumption:
    1 - 1.3 Kg per m2 according to the rface for both coats.

    Packaging:
    Container 5Kg, 15Kg.





VERKON V-2055

Water Colour Paint in Paste. Breathes, ecological, with great resistance to weather conditions. Used to paint internal and external surfaces.
    Consumption:
    300 - 350 gr. per m2 per coat according to the surface.

    Packaging:
    Container 5Kg, 15Kg.





VERKON V-2057

Rust Prevention. Metal undercoat suitable for all kinds of metal surface. The special chemical composition allows it to be applied to slightly rusty surfaces without special preparation. Characterised by great coverage and resistance. Thinned with white spirit or turpentine. Applied easily with a roll, brush or spray. V-2055 - Water Colour Paint. Paint paste, breathing, ecological, with great resistance to weather conditions. Used for painting internal and external surfaces. Before use mix with water in the measure 30% for the first coat and 5% for the second. Apply with a brush, roll or spray.
    Consumption:
    300-350 gr per m2 per coat, according to the surface.

    Packaging:
    Container 1Kg, 5Kg, 15Kg.





VERKON V-2058

Ripoline. Varnish-dye high quality for internal and external surfaces with great resistance to weather conditions and chemical cleaners. Thinned with white spirit or turpentine and applied to any metal or wood surface with special features its strong application, great coverage, and quick drying. Used with a roll, brush or spray.
    Consumption:
    ---

    Packaging:
    Container 1Kg, 5Kg, 15Kg.





INDUSTRIAL FLOORING

VERKON V-2081

Industrial Flooring Ballast.
- Specially worked mortar cement-like base, gravel aggregates and special resin.
- Apply with ballast, it is embodied and leveled with special machines for the job. (Tampar Helicopter).
- Consumption: According to floor use.
a) Light traffic: 3-4 Kg/m2
b) Medium traffic: 4-5 Kg/m2
c) Heavy traffic: 5-6 Kg/m2
    Consumption:
    3 - 5 Kg per m2 according to floor use.

    Packaging:
    Bag 25Kg.
    Colours: Grey, Black, Brick Red, Ochre, Green.





VERKON V-2082

Epoxy paint in two parts for floors. Applied by painting or spray on cement, cement mortar, wood, metal. Not affected by acids. Applied on any metal or wood surface. Used with a roll, brush or spray.
    Consumption:
    200 - 300 gr per m2 per coat.

    Packaging:
    Box Set 5Kg, Box Set 20Kg.





PLASTERS

VERKON V-2056

Decorative Plaster - Italian Style -. Ruled decorative plaster. Decorative plaster in paste form. Used for lining internal and external surfaces. Apply on fine plaster or well laid mortar, on concrete, wood, asbestos tiles-cement mortar, plasterboard etc. Not affected by damp, washed and cleaned with common detergents. Undercoat the surface from the same material, after thinning with water 30-40%. Then the material is placed on their intact with a spreader or a trowel. With the corresponding movement of a special hard grater on the applied surface bringing about the desired characteristic lines or corresponding desired styles. If used with a roll a relief type pattern is achieved.
    Consumption:
    3.5 - 4.5 Kg per m2.

    Packaging:
    Container 5Kg, 15Kg.





VERKON V-61 - Marmover

Ready Plaster.
1) Before use thoroughly clean all surfaces from chance dust - oil - deteriorated remnants etc.
2) Powder is added to the water stirring continuously until the mixture is absorbed completely. For each bag of MARMOVER approximately 5 - 5.5 kilos water of water are needed.
3) During the summer months it is preferable that the surface where the plaster will be applied is wetted to prevent its possible dehydration due to the high temperatures

APPLICATION
Used for producing plaster of various styles (grated, thrown, mycene etc.) Also recommended for repairs on internal and external surfaces.

WARNING!!
Mixed only with water. Adding other water reduces the quality of the product.

    Consumption:
    3 - 6 Kg depending on the surface.

    Packaging:
    Bag 5Kg, 25Kg.





VERKON V-62 - Marmover-v

Ready Admixture for the creation of Waterproof Plaster. Mixed with marble powder or sea sand. Replaces lime and cement in common plasterwork and on all mortar and plaster work, making the mixture waterproof and resistance to weather conditions.
Mixed with powdered marble in a measure according to bulk: 3-4 parts powdered marble - 1 part MARMOVER-V and the corresponding amount of water, or more simply 3-4 shovel loads of powdered marble - 1 one shovel of MARMOVER-V and a corresponding amount water, or 3-4 bags(27-30 Kg each)of powdered marble - 1 bag MARMOVER-V (25 Kg) and the corresponding amount of water.
Note: Also produced and in various colours - to order.
    Consumption:
    1 to 3/4.

    Packaging:
    Bag 5Kg, 25Kg.





WATERPROOFING

VERKON V-2071

White pliable water proofer, for walls and flat roofs. Apply to plasterwork, concrete, wood, asphalt, metal etc., with completely satisfactory application. Before use clean the surface well from dust, fat, grease etc. Mixed with water 10% for first coat (undercoat). For the second and third use intact. Apply by painting (brush - roll) or spray.
    Consumption:
    1 - 1.4 Kg per m2 three coats undercoat and two coats). According to the surface layer.

    Packaging:
    Container 1Kg, 4Kg, 10Kg Colours.





VERKON V-2072

Waterproof plaster coating.
- Before use, clear all surfaces from dust, oil, etc. and wet well with water.
- Apply by covering with two or three coats, after mixing it with water.
- Formula: 2 - 3 parts plaster / 1 part water.
- Consumption: 1.5 - 2 Kg/m2 according to the surface covered per coat.
    Consumption:
    1 - 1.5 Kg per m2per coat.

    Packaging:
    Bag 25Kg.
    Colours: Grey, White, Ciele.





For more information contact the company's technical support department.